Supply,Install,Connect & Start Up of Fire Pumps complete with all accessories, fittings,control panels & electrical connection as per NFPA , APSAD or British Standard.

Supply,Install,Connect & Test of Fire Wet Riser made of GSP or BSP complete with all accessories, pipe rings, riser anchors as per NFPA.

Supply,Install,Connect & Test of Fire Dry Riser made of GSP complete with all accessories, pipe rings, riser anchors as per NFPA.

Supply,Install,Connect & Test of Landing Valves Chrome Finished, Brass finished or Red Painted. Landing Valves could be provided with Stainless Steel or Red Black Steel Cabinets if required. Installation details are as per NFPA.

Supply,Install,Connect & Test of Fire Hose Cabinets Stainless Steel Finished or RAL painted as per Architectural Requirement. Two types of Hose Cabinets could be provided: Reel as per BS and APSAD or Rack as per NFPA. FHCs could be installed Exposed, Recessed or Semi-Recessed as per Architectural Decision.

Supply,Install,Connect & Test of Fire Sprinklers (Pendent or Upright Type, Concealed Type, Horizontal Wall Type, Decorative Type, High Speed Screen Type & Rapid Response Type). In addition, Sprinkler Fire Bulb Temperature Rank is from 135F up to 286F

The Fire Department Connection (FDC), also know as the Siamese Connection, is an important component found on most sprinkler and standpipe systems. When a sprinkler system,Hose or LV are activated, the fire department connects hose lines from a pumper truck to the fire department connection. This connection allows the fire department to supplement the fire protection system in the event of a fire.

Supply,Install, Connect & Test of Zone Control Valve (FZCV) which control a zone area like sprinkler in one floor in building . ZCV components is consisting of butterfly valve and flow switch and pressure gauge and test and drain valve . When sprinkler open the water is flow from the zcv and flow switch make a signal to fire alarm control panel

Supply, Install, Connect, Test & Cx of FM-200 Suppression System​ which are managing and protecting high-value assets, processes, and facilities. FM-200 systems are internationally accepted as providing reliable, effective, affordable fire protection solutions for applications found in telecommunication sites, data centers and archives, museums, oil and gas facilities, power plants, and more.

Carbon dioxide or CO2 is a colorless, odorless, electrically non-conductive gas that is highly efficient as a fire suppression agent. Carbon Dioxide Fire Protection Systems use intelligent, reliable and fast-acting control panels to quickly sense a fire before it can cause damage to property. Carbon dioxide gas has a high rate of expansion, which allows a fire protection system to work fast. When applied to a fire, CO2 provides a heavy blanket of gas that reduces the oxygen level to a point where combustion cannot occur. Since carbon dioxide is a gas, there is no clean-up associated with a fire suppression system discharge. That means minimal interruption to your business. In fact, the cost of clean-up and peripheral damage associated with a water sprinkler systems, foam systems and dry chemical agents can exceed the costs associated with the actual fire damage. With a Carbon Dioxide system, clean-up costs and downtime associated with a CO2 discharge are negligible. CO2 fire suppression system is extremely versatile and effective on a wide range of flammable and combustible materials and approved for Class A, B and C hazards.

Supply & Install all types of Fire Extinguishers (ABC Dry Powder, CO2 and Pressurized Water) as per BS, APSAD or NFPA to protect occupied areas against fire event.